buyShoe Inserts And Shoe Insoles
|
Post Date: |
Dec 25, 2007 |
Expiry date: |
Jun 22, 2008 |
|
Detailed Buying Leads Description
Looking to buy shoe insert (shoe insole) with the following specifications. Must be less than USD 5 per pair. There should be 11 sizes: U.S. Mens 4,5,6,7,8,9,10,11,12,13, and 14. The picture has the detailed sizes needed as follows: For the men's size 4, the length should be 245 mm and increase by 7 mm for each larger men's size. For the men's size 4, the heel should be 60 mm at the widest point which should be about 30 mm from the back of the heel end. This 60 mm width should increase 2 mm for each larger size. The widest point at the front part should be 80 mm and should be about 60 mm from the front end. This 80 mm width should increase 2.5 mm for each larger men's size. The cushioning should be two layers. The bottom layer should be thinner and more firm and more durable than the softer top layer. For men's size 4 to 6, the bottom layer should be 1 mm and the top layer 2 mm. For size 7 to 14, the bottom layer should be 1 mm and the top layer 3 mm. The arch should be firm if not rigid. Some designs use a plastic arch between the bottom and top layer for the arch. See picture for description of specs. Please send pictures. First order of approved samples will be 500 pairs. May also need children sizes.
Sign in to view this member's contact information